Forged Performance

[BlewByYouEvoVIII]

Hey guys, as some of you know Ive been working for Forged Performance for about a month now. I want to be able to support you guys and this forum as much as possible. I will do my best to get competitive prices for you guys.

I have also been working on the website and we have added an Evo section to the webpage.

http://www.forgedperformance.com/store/home.php?cat=385

It is still under construction and I am adding parts as quickly as I can. Please check the site out and let me know what you guys think. Also it would GREATLY help me if you guys would give me recommendations on which parts you would like to see added to the site. Thanks guys!

[Dangeruss]

I think it would benefit from adding muffler bearings and Motul blinker fluid, lol. Looks good though. I love doing HTML coding.

[oneiguy]

Thanks again for the brakes today:D

[BlewByYouEvoVIII]

np sean glad we could help

[robb86]

Can ya'll tune the X, yet?

I asked Sharif about this at that Varsity meet we had.
He told he wasn't setup with ECUTEK yet and I should contact him for a tune then.

Sent him messages on here but no response so far.

[BlewByYouEvoVIII]

Sharif isnt on this forum very much. To answer your question, we have not done any X's yet. I know we plan to do them and are working on getting all of the software needed to tune them. I will talk with him tomorrow and see where we stand on tuning the X.

[bomjoon]

you work for forged?? noway~!

[TripperFx3]

I truly don't like ECUtek. I think it's ridiculous to have to pay a licensing fee to buy tuning software. They're not Microsoft lol. I think Ecuflash is almost done for the X's too.

On another note I like the site. As far as inventory I think a good mix of JDM tyte stuff along with good American made performance parts (AMS and ETS) and I think you'll be good. Oh yea and of course good old German made suspension components. Us Germans do good suspension stuff :D

[robb86]

Sharif isnt on this forum very much. To answer your question, we have not done any X's yet. I know we plan to do them and are working on getting all of the software needed to tune them. I will talk with him tomorrow and see where we stand on tuning the X.
I figured he's not on here much.
Anyways let me know when-ever ya'll are ready for the x.

I truly don't like ECUtek. I think it's ridiculous to have to pay a licensing fee to buy tuning software. They're not Microsoft lol. I think Ecuflash is almost done for the X's too.

That's part of the reason I've been patiently waiting on a getting tuned - I'd much rather get Ecuflash and dish out the saved cash on some intercooler pipes or something!

[BlewByYouEvoVIII]

I truly don't like ECUtek. I think it's ridiculous to have to pay a licensing fee to buy tuning software. They're not Microsoft lol. I think Ecuflash is almost done for the X's too.

On another note I like the site. As far as inventory I think a good mix of JDM tyte stuff along with good American made performance parts (AMS and ETS) and I think you'll be good. Oh yea and of course good old German made suspension components. Us Germans do good suspension stuff :D

I have the KWs! as far as American made, we are AMS distributors. I dont think you will find any ETS stuff on our site anytime soon, but I am working on adding a handful of AMS products. As far as JDM stuff, I need more description than that. Also, we dont have ties with every company out there and honestly if we dont think we are going to sell much stuff from them we probably wont set up an account.

Feel free to request specific parts you would like to see. Please take this seriously though, it takes time to add parts to the site and price them at a price that works for everyone.

[BlewByYouEvoVIII]

come on guys, what else would you like to see on our site?

[robb86]

Free stuff and lots of them :D
Do I need to make an appointment for a dyno pull?
I want to come get some base #'s on the X.

[BlewByYouEvoVIII]

Free stuff and lots of them :D
Do I need to make an appointment for a dyno pull?
I want to come get some base #'s on the X.

lol, dont think I can do the free part. Ya, any dynotime needs to be appointment only. Just let us know when you would like to come by and we should be able to fit you in. Baseline's are really nice to have, thats why I did it on my MR, I wish I had done it on my blue car.

[bomjoon]

why dont you.....



start by letting me know about the parts prices i requested?? :P

weds sa90 17x9 35+ and the other stuff i asked you about earlier..

[bomjoon]

work xd9 17x9 also.

get to it. :P

[BlewByYouEvoVIII]

We really only sell Rays Wheels, no need to supply anything else because we're more than likely not going to sell many. We sell more Rays Wheels in a week than alot of shops sell in a year, lol.

[bomjoon]

yeah cuz of them 350/g35 peeps.

every z or g has them on :P

[bomjoon]

well you got any rays for 300 per wheel? lol

even gram lights would work.

[BlewByYouEvoVIII]

you always turn serious threads into little jokes dont you -_-

[bomjoon]

no i sometimes turn joke threads into serious threads...

ok how bout having a comment section?

or clearance section?

[robb86]

rays wheels :)

volk te37's, gloss black - 18x9.5 +22 w/ color matched center-caps & short black rays lugs :D price & availability?

probably 10-12weel wait :( i've been trying to find these while someone had em in stock.
speedelement on evom had em when i called but when called back to order a few hours later they were sold.

[BlewByYouEvoVIII]

no i sometimes turn joke threads into serious threads...

ok how bout having a comment section?

or clearance section?

what do you mean by comment section? Clearance section is actually a pretty good idea :D

[BlewByYouEvoVIII]

ya, we dont have them in stock, but its usually 90 days special order.

[Hikaru]

Try Driveline Motors. They are shipping my Advans and may have your wheels in stock (prob. a long shot though). Great pricing too.

[bomjoon]

comment as in feedback.

that way if you take too long on shipping the parts we can rant on there. :P

not good for the website but good for customers and keeps you inline.

[BlewByYouEvoVIII]

if its not good for the website why would we do it? :P There is nothing to keep inline on our part, as far as orders go I am confident that we dont really make mistakes. ;o