New Powder Coating Option

[redridingboost]

Wad up Guys,
so recently i had another bad "experience" with Millers Powder-coaters and i decided to research for new ones. Found one in cummings and was able to open an "account" for evoA.
Once you use the name Evoatlanta we automatically get 10% off. Pls spread the word.

Their Phone Number is :(770) 888-8818
Ask forLinda

Website: http://www.procryo.com/


The companys name is PROFESSIONAL CRYOGENIC METALLURGY & COATINGS, LLC.

If you wanted a specific color you wanted, they gave a website where you can buy any color you want (http://www.powderbuythepound.com/Temp._Controlled_Powders/)

Address: 5166 Performance Drive, Cumming, Georgia 30040

If you have any questions give me a shout :cool:

sample pics

http://farm8.staticflickr.com/7172/6710364493_fbbd73e816.jpg

http://farm8.staticflickr.com/7009/6710363555_08465e6568.jpg

http://farm8.staticflickr.com/7165/6710363277_96651cf3bd.jpg

http://farm8.staticflickr.com/7168/6710362977_c62ae13c06.jpg

http://farm8.staticflickr.com/7169/6710362199_68bb714c49.jpg

http://farm8.staticflickr.com/7012/6710361889_eca931045c_z.jpg

http://farm8.staticflickr.com/7144/6710361231_6e1633026c_z.jpg

[ryanowarrior]

Bout time u got yo shit up there.....well fuck guess I missed out on the 10% off :( since I already took my shit but it wasn't car related lol

Linda is funny lady btw both TopSpeed and Forged take there stuff here!

[redridingboost]

chill out bitch !!!!!

that trip was like driving to florida for me.

its done.

[kblock4life]

Very cool! I have been looking into powder coating my wheels but have read it can weakin or "over-age" forged alloy wheels being they have to be heated to cure. Has anyone else heard/read of this?

[ryanowarrior]

chill out bitch !!!!!

that trip was like driving to florida for me.

its done.

Then what was it like drivin up to my place lol..
I'll be takin another truck load of parts there soon again!!


I've heard that story to bout wheels but dunno how much truth to it though

[atlsupra]

We have used them several times, pretty good turn out every time. We didn't really had any bad experience with Miller either though.

[Sil'vr-boi6]

Indeed, Linda is. Kevin--what was that process they use for the crank again?

[StrScrm]

Damn that shit on the other side of the state!!

[redridingboost]

"CRYO-REM" (R) Racing Component Service. "The REM (R) procedure is not a polishing process but rather a finishing process. The REM procedure involves two steps. The first step, referred to as the "Refinement Process", involves a chemical interaction on the surface of the part. A soft, thin (one micron) film is formed on the surface of the part. The part then interacts with the ceramic media in a special vibratory bowl. During this interaction the film is physically removed from the "peaks" of the processed part and the "valleys" are unaffected. The chemically induced film re-forms only at the peaks that are interacting with the vibratory media, and the process repeats itself"

see http://www.procryo.com/RemGears.html for more info

[redridingboost]

Then what was it like drivin up to my place lol..
I'll be takin another truck load of parts there soon again!!


I've heard that story to bout wheels but dunno how much truth to it though

Might be easier for me to mail my stuff to you and you get them done ... lol lol

[killercd4g63]

i say evoatlanta everywhere i go and get 10% off. Even mcdonalds




...ok that's bs :rolleyes:

[Apex i ITR]

Cool.

Never had a bad experience with Miller but this place looks liek they do stuff more in line with car people.

What happened with Miller?

[redridingboost]

Cool.

Never had a bad experience with Miller but this place looks liek they do stuff more in line with car people.

What happened with Miller?

Now there's definitly a difference when I go to miller compared to when "Mr Vanilla" goes there. You may ask to pwdercoat your car and i would want a hub cap done...lol lol

My problem is the turnover time, i understand it may take longer but when i ask for notification on when it gets pushed back pls dont get an attitude and assume i knew this is always gonna happen. They said a week and a half to get my stuff done, so when i do call you tell me they havent even started.

I guess i should have said Apex i ITR sent me.

[Apex i ITR]

LOL. I have 0 pull with them. i went thru Ball Engine when they were building my motor.

[TouringBubble]

I used Pro Cryo years back. Great products and great service. I had some issues with the powder coating on my manifold and they repaired it for free and were really nice about it. The issues were not their fault but due to exposure and heat.

I need to get some stuff cryo treated for the Beetle, so I may as well send it over there and get the 10% ... thanks for posting.

[jamsky]

Great! Very close to my location. Thanks for sharing!

[chameleon]

i have stuff to get done but who knows if i will ever make it up there ... Miller's is right around the corner ... who what's to play "Mr. Vanilla" for me and take my stuff in.

[Apex i ITR]

LOL. Really y'all?

[StrScrm]

lol :D

[redridingboost]

just got the best news ever !!!!!! After dropping my stuff off on monday around lunch i was just informed that my stuff was completed last night !!!

They did give the disclaimer that it would be ready by this coming monday but it may be shorter.

[Sil'vr-boi6]

In for pic's...or this didn't happen.

[redridingboost]

no pics. Now i have to book my ticket to fly up there.. lol lol lol

[chameleon]

Well jumped on a "plane" this morning with Redridingboost and made it up to Cumming to drop off some of my items and pick up his items. I must say the customer service is spectacular. Linda is great and pretty funny. Glad I made it up there. Not to mention the EvoA discount is a big plus. I would HIGHLY recommend you guys go check them out.

Pics soon to come of what was picked up.

[redridingboost]

Here We Go, This is just some.

http://farm8.staticflickr.com/7149/6737654549_170ebe4b82.jpg

http://farm8.staticflickr.com/7166/6737654817_bb399216a8.jpg

http://farm8.staticflickr.com/7144/6737655147_5dc4a975bb.jpg

http://farm8.staticflickr.com/7014/6737655581_2375bc7904.jpg

http://farm8.staticflickr.com/7021/6737655757_0590641f42.jpg


Very Satisfied Customer

[WRC-LVR]

Here We Go, This is just some.

http://farm8.staticflickr.com/7149/6737654549_170ebe4b82.jpg

http://farm8.staticflickr.com/7166/6737654817_bb399216a8.jpg

http://farm8.staticflickr.com/7144/6737655147_5dc4a975bb.jpg

http://farm8.staticflickr.com/7014/6737655581_2375bc7904.jpg

http://farm8.staticflickr.com/7021/6737655757_0590641f42.jpg


Very Satisfied Customer

Very nice...that looks like a black crackle type finish on the cover and turbo. Is it an equivalent coating to the Swain white exhaust type coating to reduce heat and keep it in the turbo ? Like the ceramic type?

[Sil'vr-boi6]

Very nice...that looks like a black crackle type finish on the cover and turbo. Is it an equivalent coating to the Swain white exhaust type coating to reduce heat and keep it in the turbo ? Like the ceramic type?

The coating for the vc,br intake and compressor cover mainly aesthatic purposes however powder coating fades and stains a lot less which is another benefit. The EMP dump is ceramic coated.

[kblock4life]

wow the black crackle paint looks awesome! ill have to give them a call.