PDA

View Full Version : Forged Performance: Sat May 2, 2009 Dyno Day and Open House!

BlewByYouEvoVIII
03-25-2009, 04:32 PM
Hi everyone!

Forged Performance is pleased to announce our third annual Dyno Dyno and Open House scheduled for Sat, May 2, 2009.

If you haven't attended one of our Open Houses yet, you'll be in a treat. Over 100 Nissan/Infiniti/Mitsubishi enthusiasts will be attending, from all the various forums...some from a couple states away.

This is your chance to mingle with the entire Forged Performance staff, talk shop, and take a peek under our tent, to see where all the magic happens. :sign16:

As usual, we'll be offering a free catered lunch, drinks, and $40 cash Dyno runs on our AWD Dyno Dynamics Dyno all day long. We'll be giving away some nice prices and gifts throughout the day.

Where:
Forged Performance
498 Cobb Parkway South
Marietta, GA 30060

When
Sat, May 2, 2009
10am until 6pm

If you plan on running on our dyno, please arrive early for signups. Thanks!!

http://i489.photobucket.com/albums/rr260/RyanAtForged/DSC_4896.jpg

Video from our last event!
http://www.youtube.com/watch?v=b20Idnu9PB4 of attendees:
BlewByYouEvoVIII
03-25-2009, 04:33 PM
Just for those of you who were upset I had not posted up the info yet ;)
ryanowarrior
03-25-2009, 04:34 PM
ima upset cause its on a SATURDAY, just might have to take off for this one :P
BlewByYouEvoVIII
03-25-2009, 05:57 PM
we always have a rediculous turnout for this. It's always a great time. It would be well worth taking off work ;)
shunderwunder
03-25-2009, 06:04 PM
I'll try to make it to both, but I don't know if I'll be able to dyno yet.
em1toevo
03-25-2009, 07:25 PM
Hopefully I can make up there for this! I have finals around the first of May. I will have to check my syllabi.
Chemwarrior
03-25-2009, 07:50 PM
I wish I could come to this but unfortunately I'll be gone. :(
Dangeruss
03-26-2009, 12:01 AM
Perhaps I will come.
BalistiK_EvoIX
03-26-2009, 01:25 AM
Hey guys quick question I am going to be in town coming week and was thinking about getting my car dyno'd. I was looking at forged performances website and could not find any prices for some dyno pulls....Does anyone have a clue what it would cost to dyno my car?? Also is there anywhere around there to get any E85 because thats what I would like to get dyno'd?? Thanks, Jeff
Dangeruss
03-26-2009, 03:08 AM
Just give Forged a call or PM Ryan (BlewByYouEvoVIII) to get an estimate. There are other shops within the area that can do some tuning also if you decide to go another route.
BlewByYouEvoVIII
03-26-2009, 09:22 AM
Hey guys quick question I am going to be in town coming week and was thinking about getting my car dyno'd. I was looking at forged performances website and could not find any prices for some dyno pulls....Does anyone have a clue what it would cost to dyno my car?? Also is there anywhere around there to get any E85 because thats what I would like to get dyno'd?? Thanks, Jeff

$100 for 3 pulls.

I am not sure where to get E85. Anyone else know?
shunderwunder
03-26-2009, 11:13 AM
Here joo go.
http://www.e85refueling.com/
ZIGZAG
03-26-2009, 12:15 PM
gotta make this one !
BalistiK_EvoIX
03-26-2009, 06:38 PM
$100 for 3 pulls.

I am not sure where to get E85. Anyone else know?


How far in advance should I book this if I decide I want to do this? I will be in Atlanta on the 31st until the 2nd of April. How long does it usually take to get there and make the 3 pulls? Sorry if these are dumb questions.

Thanks,

Jeff
BlewByYouEvoVIII
03-26-2009, 06:48 PM
How far in advance should I book this if I decide I want to do this? I will be in Atlanta on the 31st until the 2nd of April. How long does it usually take to get there and make the 3 pulls? Sorry if these are dumb questions.

Thanks,

Jeff

Just let me know as soon as you can. Usually a couple days in advance will be fine. Travel time depends where you are coming from ;) It should only take about 30 minutes or so to do the dyno pulls including loading and unloading.
BalistiK_EvoIX
03-26-2009, 07:27 PM
Just let me know as soon as you can. Usually a couple days in advance will be fine. Travel time depends where you are coming from ;) It should only take about 30 minutes or so to do the dyno pulls including loading and unloading.

I mapquested from my hotel to your shop and it is about 20 minutes and there is a e85 station about 10 minutes away from the hotel. Would Wednesday April 1st work around 10 AM?? Please let me know because I think that would work best for me.


Thanks,

Jeff
tvrvic
04-11-2009, 06:19 PM
This so sucks I am going to be in San Diego that weekend setting up our new office. I was gonna see about throwing the Gen Coupe on the dyno to see what it would do... :(
Psych
05-02-2009, 10:56 AM
I will be there by 12pm
Hikaru
05-02-2009, 11:33 AM
Ryan I gotta skip man. Call outs at work. Get some good pix man.
Psych
05-02-2009, 06:27 PM
Great event as ususal!!! Had a good time
em1toevo
05-02-2009, 08:57 PM
My son's birthday party was today. Sorry I missed out on what was probably a great event.
Evolvedgti
05-02-2009, 11:45 PM
double post!
Evolvedgti
05-02-2009, 11:46 PM
My son's birthday party was today. Sorry I missed out on what was probably a great event.

happy birthday to your son Brett, Taurus FTMFW :D
em1toevo
05-02-2009, 11:48 PM
Thanks for the birthday wishes Jon! I'll pass them on to him.
Evolvedgti
05-03-2009, 12:06 AM
Thanks for the birthday wishes Jon! I'll pass them on to him.

Do, us bulls must stick together!
Psych
05-03-2009, 12:07 AM
Does anyone know which gear they were dynoing the evo's in?
BlackIX
05-03-2009, 04:03 PM
i think 3rd for gsrs and 4th for mrs.....i think thats what i was told