FS: AEM Tru-Boost, UEGO wideband, shift gauge, & 2 gauge pods

[shunderwunder]

Changing my setup a bit so these are up for sale.

AEM UEGO wideband $140 -----(SOLD Hikaru)
AEM Tru-Boost (boost controler/gauge) $180
Auto Meter Digital Pro shift gauge (level3) $100
A-pilar 2 gauge pod (gray w/speaker grill) $20 & your stock A-pilar cover (w/speaker grill)
Auto Meter single gauge steering columnm pod $20 & your old cover

I have the instruction manuals for all 3 gauges by the way.

[Hikaru]

Andy, how did you like the AEM gauges? Do the constantly changing digital readouts get annoying to look at while driving? Are they distracting at all?

[shunderwunder]

They aren't distracting, but they are a little harder to read than an analog gauge cause the numbers are constantly changing. With my old analog boost gauge a quick glance will tell you where the boost is. All widebands have a digital readout so the AEM is as good as any other & does not need calibration. The Tru-Boost is a good boost controler & can be set with 2 diffrent boost levels if needed. I got Chintans old Zeitronix setupo with the boost, EGT, & AFR all in one display. I'll be using the Maft-Pro for boost so I don't need them anymore.

[shunderwunder]

Should have pics up tomorrow. Got most of it out now, but still a good bit to go. I forgot what a PITA running wires can be :(

[Charlie]

Auto Meter Digital Pro shift gauge (level3) $100

what does the gauge look like, all black?
If so I will prob take it, please send a pic
Where did you run the rpm wire to?.

A-pilar 2 gauge pod (gray w/speaker grill) $20 & your stock A-pilar cover

Do you have all the clips if not I would like to keep mine on my stocker but willing to take this as well.

[shunderwunder]

Auto Meter Digital Pro shift gauge (level3) $100

what does the gauge look like, all black?
If so I will prob take it, please send a pic
Where did you run the rpm wire to?.

A-pilar 2 gauge pod (gray w/speaker grill) $20 & your stock A-pilar cover

Do you have all the clips if not I would like to keep mine on my stocker but willing to take this as well.

1. Black with silver trim ring. I can paint the ring black for you if you want. RPM readout is red. Shift light colors are changeable.
2. RPM wire is tapped in at the ECU. The VIII has diffrent ECU wiring, but I can find out which one you need to tap into.

3. I do have the 2 metal clips. They stayed on the car. You can keep yours or I can pull them & we can swap. I trimmed the edge of my old A-pilar so it doesn't stick out under the cover. It does have a slight gap at the top when installed due to the guage pod being on top of the old cover. There is a spot on one of the screw covers that I'm going to touch up before it's sold.

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7688.jpg

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7683.jpg

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7684.jpg

[shunderwunder]

Charlie does your A-pilar have a speaker? I forgot to put that in the first post.

[shunderwunder]

More pics. The Wideband sensor & it's harness are still on the car so I'll get pics of them later.

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7690.jpg

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7693.jpg

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7691.jpg

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7692.jpg

[Charlie]

yes it does, let me check the cash flow tomorrow(wife). I just had to buy new brake pads, installed a roll center kit and a wideband. Puchasubg cams tomorrow. Might have to hold off on the shift guage. Let you know tomorrow.

[shunderwunder]

No problem. Let meknow.

Did you install the roll center kit yourself? If so, is it hard to do?

[AP2_S2K]

Changing my setup a bit so these are up for sale.

AEM UEGO wideband $140
AEM Tru-Boost (boost controler/gauge) $180
Auto Meter Digital Pro shift gauge (level3) $100
A-pilar 2 gauge pod (gray w/speaker grill) $20 & your stock A-pilar cover (w/speaker grill)
Auto Meter single gauge steering columnm pod $20 & your old cover

I have the instruction manuals for all 3 gauges by the way.

AEM EUGO wideband + AEM Tru-Boost and A-pillar. Whats the pro shift gauge?

I`ll pm your my cell number...

Wilson....

[Charlie]

No problem. Let meknow.

Did you install the roll center kit yourself? If so, is it hard to do?

No I did not intall myself due to the lack of a press and misc press tools(socket)

It is not hard to do, I have watched the install on several evo's and it is straight forward. You just need the proper tools. Remove the arms press out the old, grease and press in the new. Reinstall arms, align.

See if you have another buyer right now I need to get these cams first.

[Hikaru]

Andy you still got the black bezel for the wideband?

What's up Wilson! Where you been?

[shunderwunder]

Andy you still got the black bezel for the wideband?

What's up Wilson! Where you been?

I'll look, but I don't think I have the black bezel. I can paint the silver one if you want it (any color you want).

[shunderwunder]

Here's a couple pics of them when they were installed.

http://i253.photobucket.com/albums/hh51/shunderwunder/bdbcaf1c.jpg

http://i253.photobucket.com/albums/hh51/shunderwunder/100_6292.jpg

[shunderwunder]

And a night pic. Sorry for the crappy shot. It's the only night shot I have.

http://i253.photobucket.com/albums/hh51/shunderwunder/100_7238.jpg

[The_Red_Viii]

Hey I'm interested in that TRU boost gauge!

[shunderwunder]

Still got it. Let me know.

[shunderwunder]

AEM EUGO wideband + AEM Tru-Boost and A-pillar. Whats the pro shift gauge?

I`ll pm your my cell number...

Wilson....


The shift gauge is a programable shift light with RPM readout that is built into a guage style setup.

[scoobysam]

i'll take the wideband and the steering column pod. My stock one has holes in it though. Would you sell without the trade? Also where in alpharetta are you? Are you close to sandy plains road and 92? I can meet you sunday morning before 1pm or monday-wed morning after 11am. Let me know!

[shunderwunder]

i'll take the wideband and the steering column pod. My stock one has holes in it though. Would you sell without the trade? Also where in alpharetta are you? Are you close to sandy plains road and 92? I can meet you sunday morning before 1pm or monday-wed morning after 11am. Let me know!

Sorry man, Jason (Hikaru) PMed me last night that he will take the wide band so it is already sold. I still have the column pod if you want it anyway & I do not need your old one. I forgot that I picked up a good one a while back when I knew I was eventually gonna pull this stuff out. I live near North Point Mall, but I can meet you wherever.

[scoobysam]

dang, it's ok then. I dont need the column mount if the wideband is sold. Let me know if he backs out.

[shunderwunder]

bump.

[shunderwunder]

Bump.