how do i install my MBC!!

[lazyevo<3]

ok guys just got my boost controler how do i install it?? send me links for directions ext ext....... or come over and help me!! ill pay for some good dinner and drinks let me know im in cumming i need this asap!!

[bomjoon]

always wanting something for nothing huh?

look up on evom. they have threds on it with diagrams.

its easy. if you dont know how to do it then pay someone some decent $$ to do it.

[lazyevo<3]

boom come here ill buy u dinner and drinks at my work!! and pay for ur gas?

[Chemwarrior]

There are two different ways to install the mbc. Look in the how-to section on evom and you can find the write up there.

[em1toevo]

I have mine sitting in a box ready to be installed too-when I have some time...

[Chemwarrior]

HOLY CRAP!! You even posted this same question in the frickin how-to section of evom!! Come on now! Pull your frickin head out of your frickin ass!

How about this? Here is the frickin link that is half a page up from where you posted your question in evom.

http://forums.evolutionm.net/evo-how-tos-installations/75680-manual-boost-controller-install.html

[lazyevo<3]

lmao dude look at the name im LAZY haha

[Chemwarrior]

That's no excuse. I bet you have someone at home to wipe your ass and spoon feed you.

[ryanowarrior]

mine come with instructions lol,, where did you get one??

[lazyevo<3]

yes sir!!

[lazyevo<3]

top speed for 55 bucks i couldnt wait on u dude u never answer th phone

[ryanowarrior]

lol its cool man i understand man, been busy all day, just come in and was gonna holla at ya but guess not lol

[Hikaru]

I don't understand why you got cams b4 the fuel pum or MBC? Did you do any research? What's the rush on everything? Does the car have to be completely modded by the end of the month or something? Just asking....

[jktripp]

he's going home to jersey and driving all the way.... almost been better to wait i'm thinking.... it is an evo, its badass stock.....

[Hikaru]

Ahhh. I see. Trying to take it home hooked up. Yeah modding shouldn't be rushed like that...

[jktripp]

well, originally, i think he thought,"gets cams, get tuned, sound good." not realizing til after cam install that he needs a few more things to finish.... (thats why i have a boost gauge and controller and fuel pump now, already installed, deciding on cams...)

[ryanowarrior]

thought you were gettin cams

[lazyevo<3]

yea i didnt kno i needed the pump till after and i was told i can get tuned and they will adjust my boost by the ecu...... and now i found out alot other i just got installing my fuel pump myself it wasnt to bad!! bitch to get out but thats about it....... now i am looking for what like to tap into for the boost gauge i got power to gauge and vacum line ran but what line do i tap into?? the one on the intak mani that travles to the Bov? anyone know?? then next i have to install my mbc its a little confusing i dono what lines to take off and what not

[jktripp]

we tried..... (good effort by shunder and blkonblk2), but long story short, the threads for the t-belt tensioner were stripped by the previous owner so the tensioner tool couldnt loosen the belt to remove the cams.......

[jktripp]

hey lazy, wish i could help... i had my boost controller installed. is it manual or electronic?

[lazyevo<3]

ouch^^^ that sucks!!!

[jktripp]

it happens. no big deal..... just hate to see another evo go down.....

[lazyevo<3]

manual i just am a little confused on the directions!! errrrr wish some one was just local i ran all the lines for the vacum and i dono what one to tap into im confused on that to

[jktripp]

wish i could help you out....

[lazyevo<3]

i called ur ass i was gonna see if u wanted to have a couple beers and work on my car haha but im almost done now i just got the vacum line and boost controler and im done!!

[jktripp]

http://forums.evolutionm.net/evo-how-tos-installations/75680-manual-boost-controller-install.html[/QUOTE]

did you look over this whole writeup? (nice find dan) it has pictures at the bottom of the write(click to open)
sometimes it helps me to write down the directions instead of just reading them, that way it makes me read each word and i understand what they are saying a little bit more....

[jktripp]

i was at my gf's since noon and then i had to train a few ppl tonight at the gym.... sorry... didnt get text til after gym sessions...

[jktripp]

you cant bribe me with alcohol, i dont drink..... you dont have to bribe me at all... if i know how to help, i'll do it out of friendship. sorry about not getting text til later.....

[lazyevo<3]

haha nah i was just sayin ya i dont drink much either what kind of training do u do i need some help dude im as skinny as a twig!!

[ryanowarrior]

did you get your boost gauge to workin??

[jktripp]

Option #2: "T" into the hose that runs between the diverter valve (DV) & the intake manifold. Note that the DV is often referred to as a BOV.

did you do this yet?

this was taken from the writeup dan found.....

[ryanowarrior]

^ ah ya beat me to that part :)

[lazyevo<3]

look at this it seems like i just put a hose from the waste gate to the mbc and tapped into the bov if im right? and just take all the other lines off i guess??

http://forums.evolutionm.net/attachments/evo-engine-turbo-drivetrain/21291-just-installed-mbc-mbc-small.jpg

[lazyevo<3]

ok i think its finaly clicking to me so i have to T from the bov and that hose goes to the one end of the mbc then the other one goes to the waste gate actuator? how do i clamp of the turbo nipple/?

[jktripp]

looks like you need to run new lines [indicated by the red lines]
1) to tap into existing line between bov and intake mani, and
2) completely new hose to waste gate actuator and cap off tube to
a) turbo nipple and
b) nipple on the intake pipe...
it doesnt make it too clear if you cap old line to waste gate actuator though.....
but then again, as i said, i have never did this before, im just going by the directions posted....

[jktripp]

did it not come with all necessary hardware?

[lazyevo<3]

yea thats what it looks like to me!! but then again on step 1 it says run it to the turbo and then to the boost controler and then from the mbc to the waste gate actuator i wonder what was is better to do!?

[jktripp]

hold on-i'll go look at mine...brb

[lazyevo<3]

i think im goin to do it this way^^ bc i am goin to tap into the BOV line for my boost gauge ok im goin back down to try this ill be back in a min im sure!!

[jktripp]

you can always wait til touring bubble or ryan or shunder or dan get on and read up to where you are.... they will probably be able to help the rest of the way.... you are basically finished i think.... waiting for them might be better.... asking me is like asking a kindergardner about algebra.... i can only go so far by reading someone else's post....

[bomjoon]

you should have paid me $50 to do this...

[shunderwunder]

Holly shit. I'm leve you guys alone for a few hours & youve got a new thread with 2 pages that is completely on topic. I'm dissapointed in yall.

[bomjoon]

im charging to answer your questions from now on too...

[jktripp]

nothings free anymore..... huh....?

[shunderwunder]

not so much so.

[jktripp]

so shunder and bombom, does it seem right what we were guessing at......

[shunderwunder]

It was too on topic. I couldn't stand to sift thru it. :)

[bomjoon]

i didnt read the posts you guys made...

but tell him to follow the diagram on the evom forum.

you cant go wrong. i even explained to him over the phone.
he should have gotten it done by now.

[shunderwunder]

seriously though. I did mine a long time ago & it's an EBC

[jktripp]

yeah, the thread from evom was pretty much fool-proof, maybe he felt better knowing someone was giving guidance as well.

[jktripp]

mine is electronic as well..... but i didnt do mine... paid....

[shunderwunder]

I don't pay for labor unless I have to. I just search the interwebs till I find the info I need & do it myself.

[lazyevo<3]

ok soooooooooooooo i got almost all of it done and a FRIGGEN am like 4 inches short on hose!!!!!!!!!!!!!!!!!!!!!! now i have no damn car lol and i got work at 10 wtf am i soposed to do now!

[jktripp]

ive done everything else....... just sometimes the electronic stuff just doesnt feel right.... oh, and the tubo timer was installed as well.....

[lazyevo<3]

i lied i didnt run out of hoes i thought i did haha just found some BUT how do i cap off the little valve on the turbo???

[shunderwunder]

you can get a vaccum cap at any auto parts store.

[jktripp]

yeah shunder, how does he cap off the nipple on the turbo....?

[shunderwunder]

i lied i didnt run out of hoes i thought i did haha just found some BUT how do i cap off the little valve on the turbo???

If youve got spare hoes I could use a few. :D

[lazyevo<3]

lol lol ok shunder so i got the hose on the actuator but no little clamp!! it is to big the hose i bought is a little less thick but it is a BIZZZNICH to slid on there and i tryed to pull it off and it wont come off do u think it will blow off ?

[shunderwunder]

It shouldn't, but I just use zip ties.

[lazyevo<3]

ok and the little nub on the turbo is that put out alot of pressure? bc if i cap it off with it blow off if there is alot of boost?

[shunderwunder]

use a zip tie there as well.

[jktripp]

then tape it!

[shunderwunder]

Hell break out the welder. That will do it fer sho.

[jktripp]

you and that dang welder.....

[shunderwunder]

wish I had one & knew how to use it.

[lazyevo<3]

ok here are some pics of my 3 hour long process haha

[lazyevo<3]

these pics should be bigger!!

[lazyevo<3]

does that look like i tapped it into the right spot on pic number one and 2 i need some small clamps to throw on

[TouringBubble]

I personally would have just used the stock boost source on the LICP to connect the MBC instead of tapping another line in the to DV. But, what you've got looks correct assuming the MBC is facing the correct direction.